Laboratory Wet High Intensity Magnetic Separator

The slurry in the mixing tank enters the sorting box through the feeding valve and the flat mouth, and the non-magnetic mineral particles fall into the tailings bucket along the tooth plate gap under the action of gravity, and the magnetic mineral particles are adsorbed on the tooth plate under the action of the magnetic field. , after feeding the ore, the ore-distributing hopper is placed on the upper part of the middle ore bucket, and the middle ore flushing solenoid valve is opened, (the flow rate can be adjusted by the middle ore flushing gate valve), and the non-magnetic ore particles mixed in the sorting box are washed, and then the ore-dividing bucket swings to the upper part of the concentrate barrel, and cut off the magnetizing power supply at the same time. After the magnetic field of the sorting box disappears, the concentrate flushing solenoid valve opens, and the magnetic ore particles adsorbed on the tooth plate are flushed into the concentrate barrel (the amount of flushing water is determined by the concentrate Gate valve adjustment), after completing a sorting cycle, the PLC resets for the next one, and another sorting cycle. To achieve the purpose of separating magnetic ore and non-magnetic ore.